Li-Ion batteryLight, compact, longer duration, no memory effect.
Battery packWith Samsung SDI cell
Keyless chuckEnables fast manual changing of accessories without any special key.
Variable torqueTorque regulator enables adjustment of contact pressure and torque force.
V-grooveAllows chamfering at the edges of treated workpieces.
2 function modes (drilling / impact drilling)Enables changing between 2 operation modes: drilling (in wood, metal, plastic) and impact drilling (in concrete, bricks, masonry).
2 function modes (screwdriving / drilling)Enables changing between 2 operation modes: screwdriving (screwing / unscrewing threaded fasteners) or drilling (in wood, metal, plastic).
3 function modes (drilling / impact drilling / chiselling)Enables changing between 3 operation modes: drilling (in wood, metal, plastic), impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).
4-stage pendulumEnables the changing of pendular motion between 4 stages.
Angular adjustmentProvides a precise and angle-accurate sawing of all required cuts.
Anti-vibration systemAllows to reduce the fatigue during extended period of work.
Planing depth regulatorConstantly adjustable and suitable as additional handle for safer positioning.
Cutting depth adjustmentAllows half-cuts in order to obtain clean cuts and sharp edges during a second try.
Dust extraction systemAllows to collect dust in designated dust bag or to connect vacuum cleaner.
Electronic speed adjustmentSpeed is controlled from 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on.
Extra gear rim chuck with SDS PLUS adapterAllows the use of drill bits with cilindric shank in rotary hammers with SDS PLUS chuck.
Gear rim chuckEnsures safe fastening of accessories.
Integrated LED lightLocated on the housing, it offers the user an always well lit workspace.
Keyless chuck with locking functionEnables fast manual changing of accessories without any special key. Equipped with locking function ensures reliable fixation of accessories.
Lock-off functionFix OFF position of on/off switch to prevent an accidental switching on of the power tool.
Lock-on functionFix ON position of on/off switch to ensure comfort during extended work mode.
M10 spindle threadSuitable for accessories featuring M10 mounting bore.
M14 spindle threadSuitable for accessories featuring M14 mounting bore.
Metal keyless chuckEnables fast manual changing of accessories without special key.
Reverse functionRotational direction switch allows to change rotational direction.
Quick chargerAllows full battery charging in only 1 hour time.
Safety clutchProtects the power tool against overload and damage in case of accessories sticking during drilling.
Safety stopAvoids demages of the treated surface and of the blades of the planer while the power tools is temporarily put aside after completion of the operation.
SDS-Plus chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
Soft gripLocated on the handle, it offers additional comfort for the users.
Soft startProvides a slow and even start-up without overloading the power grid.
Spindle automatic locking Drill spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.
Spindle lockBlocks the spindle in its rotating movement so that the circular saw blade may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the accessories may be inserted or removed easily.
Step speed selectionAllows to select the range of revolutions per minute for specific types of work.
Vario-lock modeAllows to arrange the chisel in a comfortable position for specific chiseling works.
Variable speedAllows to select optimal speed for specific materials.
Two-position on / off switchSecured both in "on" position and in "off" position.
Restart protectionPrevents the power tool from automatically starting up after a power cut.
Saw blade easy changeEnables fast manual changing of saw blade without any special key.
Resharpenable bladesUse the specific device provided in order to resharpen blades when blunted.
Interchangeable bladesBlades sharpened on both sides; this design does not allow re-sharpening.
Impact drilling functionFor impact drilling in hard materials ( such as concrete, bricks, masonry).
Screwdriving modeFor screwing / unscrewing threaded fasteners (such as bolts, nuts, screws, self-tapping screws).
1/2" square tool holder Suitable for accessories provided with appropriate mounting hole (1/2" square). Enables quick accessories changes.
1/4" hexagonal tool holder
Suitable for accessories provided with appropriate shank (1/4" hexagonal). Enables quick accessories changes.
2 function modes (blower / vacuum cleaner)Allows to convert the blower into a vacuum cleaner in order to collect debris.
2 function modes (impact drilling / chiselling)Enables changing between 2 operation modes: impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).
2-step regulatorAllows to change the settings of work-temperature and air flow.
2 function modes (stirring / drilling)Enables changing between 2 operation modes: stirring (miхing different building materials) or drilling (in wood, metal, plastic).
3-step regulatorAllows to change the settings of work-temperature and air flow.
3 function modes (screwdriving / drilling)Enables changing between 3 operation modes: screwdriving (screwing / unscrewing threaded fasteners), drilling (in wood, metal, plastic) or impact drilling (in concrete, bricks, masonry).
3 V-grooves Allows chamfering at the edges of treated workpieces.
30L capacityThe vacuum cleaner container provides 30 liter capacity.
60l
80l
100l
Adjustable nozzleAllows to choose between 3 different spray jet shapes.
Adjustable spark protectorProtects user from sparks and metal filings during the grinding process. It may be adjusted to the most suitable angle for work.
Adjustable workpiece supportAllows safe placement of workpiece on the grinding disc, that permits to maintain the desired sharpening angle.
Air flow adjustmentAllows to adjust optimal air flow for specific works.
Anti-vibration handleAllows to reduce the fatigue during extended period of work.
Automatic circuit breakerPrevents unintentional switching on in case of current supply interruption. It increases safety of the operation.
Both-sided table extensionsAllows to cut bigger workpieces.
Carriage positionAllows to lower and lock the carrying grip for easy transportation and space-saving storage.
Clamping deviceAllows to secure the workpiece during operation.
Sanding paper clamping systemFeatures clamp lever for easy and convenient replacement of sanding papers.
c-electro
Rotation speed stabilization systemMaintains the preset revolutions per minute both at an idle speed and under load. This allows a smooth advance of the power tool during operation.
Cool stageCold air mode allows to cool off workpieces and surfaces after heat treatment.
Cutting depth adjustmentAllows half-cuts in order to obtain clean cuts and sharp edges during a second try.
Rear D-handleAllows safe handling.
DC motorMechanically commutated electric motor powered by direct current.
Wet / dry cuttingAllows dry cutting and wet cutting thanks to the integrated.
d-w-oper
Wet/dry functionAllows water absorption, oil absorption, acid suction and dust absorption.
Dry cuttingCutting without water cooling system.
d-oper
Dust blowing from the cutting lineAllows to re-direct the sawdust air flow.
e-s-adj
Full blade safety guardSecures cutting disc from along diameter.
Hanging systemAllows to hang power tool during the utilization.
HEX-17 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-28 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
HEX-30 tool holder Suitable for accessories featuring equivalent shank. It allows fast manual fastening.
Impact rate regulationAllows to select required impact frequency and power of impact.
Impact strength regulationAllows to select optimal strength of impact for specific materials.
Kerf laser indicatorShows the cutting line.
LED-screenShows the selected number of revolutions.
LED-screenShows the selected temperature.
Lock-off / Lock-on functionFix OFF position of on/off switch to prevent an accidental switching or fix ON position of on/off switch to ensure comfort during extended work mode.
M10 tool holder threadSuitable for accessories featuring M10 shank.
M14 tool holder threadSuitable for accessories featuring M14 shank.
M22 spindle threadSuitable for accessories featuring M22 mounting bore.
M22 tool holder threadSuitable for accessories featuring M22 shank.
Choosing the chips ejection directionAllows to install reflector for chips ejection in two opposite directions.
Plunge depth control systemAllows the user to select the desired milling depth.
Mitre angular adjustmentProvides a precise and angle-accurate sawing of all required cuts.
Ni-Cd batteryProvides good performance at low temperatures.
Overload protectionAutomatically switches off the power tool in case of overheating.
Power light indicatorOn when the power tool is connected to the mains and ready to be switched on.
Rotating rear handleRear handle can be rotated into different positions.
Rotation stabilizerMaintains set rotation rate irrespective of applying pressure on the surface during polishing.
Tool holder Allows to install accessories with appropriate shank.
Scale of milling depthShows the selected depth of milling.
SDS-Max chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
SDS-Plus square chuckSuitable for accessories featuring equivalent shank. It allows fast manual fastening.
Sliding working tableIntended to ease the workpiece sliding movement when performing cross and angular cutting.
Spindle lockBlocks the spindle in its rotating movement so that the grinding accessories may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the diamond cutting blade may be inserted or removed easily.
Spindle lockBlocks the spindle in its rotating movement so that the router bits may be inserted or removed easily.
Stroke rate regulationAllows to adjust optimal stroke rate for specific materials.
Speed adjustmentAllows to change revolutions per minute.
Table for stationary useAllows the use of power tool in stationary mode.
Temperature protectionAutomatically switches off the power tool in case of overheating.
Temperature settingAllows to adjust optimal temperature for specific types of work.
Variable paint flowAllows to set the intensity of the paint application ensuring perfect coverage.
Variable speedAllows to select optimal belt speed for specific types of work.
Velcro and clamping fixing systemAllows the use of abrasives with both type of fixing system: clamping or velcro.
Velcro fixing systemAllows quick, easy and safe fixation of abrasives.
Water resistant on/off switchSwitch is protected against water splashing.
Wet cuttingAllowed thanks to the integrated water cooling system.
Wet grindingAllowed thanks to the integrated water cooling system.
Wet operationAllowed thanks to the integrated water cooling system.
Carbon brush replacement indicator lightWarns regarding the need to replace carbon brushes.
Circular saw blade easy changeEnables fast manual changing of circular saw blade without any special key.
2 lines projection modeAllows to project one horizontal line and / or one vertical line.
3 lines projection modeAllows to project one horizontal line and / or two vertical lines.
5 lines projection modeAllows to project one horizontal line and / or four vertical lines.
Laser class 2
Automatic self-levelling
High class OSRAM Diode
Belt clipThe tool is provided with hook for easy carrying.
range
ref-level
stat1
Possibility of steady-state useThe power tool design allows steady-state operation.
measure
calcul
celect-c
celect-m
mem
Battery locking systemLocking bracket provides secure attachment battery, and prevents it disconnection even by work with strong vibrations.
Brushless motorBrushless motor without carbon brush for smooth and efficient work and maintenance-free.
level
lcd
backlight
zoom
4-mode
arc-f
Easy startThe easy start function (increased voltage of idle running) facilitates the lighting up of the welding arc
Voltage reduction device VRDThe function of voltage reduction of idle running increases the safety of the welding works performance
Input powerAllow use one or three phase input power.
tig/mma
TIG welding technologyGas tungsten arc welding / Tungsten inert gas welding.
24-4t
Inductance regulationAllows to adjust the arc softness and stiffness. For deep weld penetration, the arc is made stiffer; however, spattering is increased in this case. The soft arc is used to weld root welds and to lift vertical welds.
Voltage meterShows the selected voltage.
Voltage regulationAllows you to set the voltage value.
External wire feederExternal welding wire feeding unit
CUT technologyPlasma cutting.
Welding current meterShows the selected welding current.
Internal wire feederWelding machine has Internal welding wire feeding.
Gradual decrease of welding currentUsing special regulator time of welding current decrease can be set. Gradual decrease of welding current allows high-quality crater filling in the end of welded seam.
High-frequency arc startingWelding arc is started without contact between tungsten electrode and welding surface using a flash generated by high-frequency device.
MOSFET technologyMetal-oxide-semiconductor field-effect transistor.
MIG/MMA technology
Air cooling
Hot start functionThe hot start function increases the set welding current for a short time at the moment of the welding arc
Current controlAllows the intensity of the current to be changed, depending on the thickness of the metal
3-PhasesThree phase input power.
1-PhaseSingle phase input power.
IGBT technologyInsulated-gate bipolar transistor.
MMA welding technology Shielded metal arc welding / Manual metal arc welding.
Pressure protectionThe system prevent the pressure overload.
de-tank
hose
adq
Self primingThe automatic system allows to start the tool quickly even after long inactivity.
Adjustable streamEnables fast manual adjustment of water stream.
e-fill
s-clean
station
Metal tankMade of robust stainless steel, reliable and easy to clean
1-2-s-a
1-2-3-s-a
3filter
blowing
s-adj2
220v
auto-clean
p-rotation2
ip54
x32
ManometerThe tool is provided with manometer for a precise regulation of the pressure.
q-change
a-lock-screw
Carriage positionAllows to lower and lock the carrying grip for easy transportation and space-saving storage.
Outdoor modeAllows to make measurements in conditions of strong illumination
Unlevelled signalIt signals the impossibility of automatic alignment of the laser head.
Laser head lockingAllows to lock the laser head in a stationary position
Integrated tripodThe tripod is included in the delivery set.
Precise rotationAllows you to position the vertical beam with high accuracy
al-frame
s-b-lock
rebat
l-sensor
Technical Specifications | |
---|---|
Rated power | 430 W |
No-load speed | 26000 min-1 |
Stroke of the router base | 30 mm |
Technical Specifications | |
---|---|
Rated power | 1050 W |
No-load speed | 12000 - 30000 min-1 |
Stroke of the router base | 50 mm |
Technical Specifications | |
---|---|
Rated power | 2100 W |
No-load speed | 8000 - 23000 min-1 |
Stroke of the router base | 60 mm |
Technical Specifications | |
---|---|
Rated power | 2100 W |
No-load speed | 8000 - 23000 min-1 |
Stroke of the router base | 60 mm |