Close

Li-Ion battery
Light, compact, longer duration, no memory effect.

Battery pack
With Samsung SDI cell

Keyless chuck
Enables fast manual changing of accessories without any special key.

Variable torque
Torque regulator enables adjustment of contact pressure and torque force.

V-groove
Allows chamfering at the edges of treated workpieces.

2 function modes (drilling / impact drilling)
Enables changing between 2 operation modes: drilling (in wood, metal, plastic) and impact drilling (in concrete, bricks, masonry).

2 function modes (screwdriving / drilling)
Enables changing between 2 operation modes: screwdriving (screwing / unscrewing threaded fasteners) or drilling (in wood, metal, plastic).

3 function modes (drilling / impact drilling / chiselling)
Enables changing between 3 operation modes: drilling (in wood, metal, plastic), impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).

4-stage pendulum
Enables the changing of pendular motion between 4 stages.

Angular adjustment
Provides a precise and angle-accurate sawing of all required cuts.

Anti-vibration system
Allows to reduce the fatigue during extended period of work.

Planing depth regulator
Constantly adjustable and suitable as additional handle for safer positioning.

Cutting depth adjustment
Allows half-cuts in order to obtain clean cuts and sharp edges during a second try.

Dust extraction system
Allows to collect dust in designated dust bag or to connect vacuum cleaner.

Electronic speed adjustment
Speed is controlled from 0 to maximum by pressing force of on/off switch. Light pressure results in low revolutions, which enable a smooth power tool switch-on.

Extra gear rim chuck with SDS PLUS adapter
Allows the use of drill bits with cilindric shank in rotary hammers with SDS PLUS chuck.

Gear rim chuck
Ensures safe fastening of accessories.

Integrated LED light
Located on the housing, it offers the user an always well lit workspace.

Keyless chuck with locking function
Enables fast manual changing of accessories without any special key. Equipped with locking function ensures reliable fixation of accessories.

Lock-off function
Fix OFF position of on/off switch to prevent an accidental switching on of the power tool.

Lock-on function
Fix ON position of on/off switch to ensure comfort during extended work mode.

M10 spindle thread
Suitable for accessories featuring M10 mounting bore.

M14 spindle thread
Suitable for accessories featuring M14 mounting bore.

Metal keyless chuck
Enables fast manual changing of accessories without special key.

Reverse function
Rotational direction switch allows to change rotational direction.

Quick charger
Allows full battery charging in only 1 hour time.

Safety clutch
Protects the power tool against overload and damage in case of accessories sticking during drilling.

Safety stop
Avoids demages of the treated surface and of the blades of the planer while the power tools is temporarily put aside after completion of the operation.

SDS-Plus chuck
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

Soft grip
Located on the handle, it offers additional comfort for the users.

Soft start
Provides a slow and even start-up without overloading the power grid.

Spindle automatic locking
Drill spindle is locked when the on/off switch is not pressed, enabling to use the tool as a screwdriver.

Spindle lock
Blocks the spindle in its rotating movement so that the circular saw blade may be inserted or removed easily.

Spindle lock
Blocks the spindle in its rotating movement so that the accessories may be inserted or removed easily.

Step speed selection
Allows to select the range of revolutions per minute for specific types of work.

Vario-lock mode
Allows to arrange the chisel in a comfortable position for specific chiseling works.

Variable speed
Allows to select optimal speed for specific materials.

Two-position on / off switch
Secured both in "on" position and in "off" position.

Restart protection
Prevents the power tool from automatically starting up after a power cut.

Saw blade easy change
Enables fast manual changing of saw blade without any special key.

Resharpenable blades
Use the specific device provided in order to resharpen blades when blunted.

Interchangeable blades
Blades sharpened on both sides; this design does not allow re-sharpening.

Impact drilling function
For impact drilling in hard materials ( such as concrete, bricks, masonry).

Screwdriving mode
For screwing / unscrewing threaded fasteners (such as bolts, nuts, screws, self-tapping screws).

1/2" square tool holder
Suitable for accessories provided with appropriate mounting hole (1/2" square). Enables quick accessories changes.

1/4" hexagonal tool holder
Suitable for accessories provided with appropriate shank (1/4" hexagonal). Enables quick accessories changes.

2 function modes (blower / vacuum cleaner)
Allows to convert the blower into a vacuum cleaner in order to collect debris.

2 function modes (impact drilling / chiselling)
Enables changing between 2 operation modes: impact drilling (in concrete, bricks, masonry) and chiselling (plaster and ceramic coatings revoval or chiselling of cable ducts).

2-step regulator
Allows to change the settings of work-temperature and air flow.

2 function modes (stirring / drilling)
Enables changing between 2 operation modes: stirring (miхing different building materials) or drilling (in wood, metal, plastic).

3-step regulator
Allows to change the settings of work-temperature and air flow.

3 function modes (screwdriving / drilling)
Enables changing between 3 operation modes: screwdriving (screwing / unscrewing threaded fasteners), drilling (in wood, metal, plastic) or impact drilling (in concrete, bricks, masonry).

3 V-grooves
Allows chamfering at the edges of treated workpieces.

30L capacity
The vacuum cleaner container provides 30 liter capacity.

Adjustable nozzle
Allows to choose between 3 different spray jet shapes.

Adjustable spark protector
Protects user from sparks and metal filings during the grinding process. It may be adjusted to the most suitable angle for work.

Adjustable workpiece support
Allows safe placement of workpiece on the grinding disc, that permits to maintain the desired sharpening angle.

Air flow adjustment
Allows to adjust optimal air flow for specific works.

Anti-vibration handle
Allows to reduce the fatigue during extended period of work.

Automatic circuit breaker
Prevents unintentional switching on in case of current supply interruption. It increases safety of the operation.

Both-sided table extensions
Allows to cut bigger workpieces.

Carriage position
Allows to lower and lock the carrying grip for easy transportation and space-saving storage.

Clamping device
Allows to secure the workpiece during operation.

Sanding paper clamping system
Features clamp lever for easy and convenient replacement of sanding papers.

c-electro

Rotation speed stabilization system
Maintains the preset revolutions per minute both at an idle speed and under load. This allows a smooth advance of the power tool during operation.

Cool stage
Cold air mode allows to cool off workpieces and surfaces after heat treatment.

Cutting depth adjustment
Allows half-cuts in order to obtain clean cuts and sharp edges during a second try.

Rear D-handle
Allows safe handling.

DC motor
Mechanically commutated electric motor powered by direct current.

Wet / dry cutting
Allows dry cutting and wet cutting thanks to the integrated.

d-w-oper

Wet/dry function
Allows water absorption, oil absorption, acid suction and dust absorption.

Dry cutting
Cutting without water cooling system.

d-oper

Dust blowing from the cutting line
Allows to re-direct the sawdust air flow.

e-s-adj

Full blade safety guard
Secures cutting disc from along diameter.

Hanging system
Allows to hang power tool during the utilization.

HEX-17 tool holder
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

HEX-28 tool holder
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

HEX-30 tool holder
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

Impact rate regulation
Allows to select required impact frequency and power of impact.

Impact strength regulation
Allows to select optimal strength of impact for specific materials.

Kerf laser indicator
Shows the cutting line.

LED-screen
Shows the selected number of revolutions.

LED-screen
Shows the selected temperature.

Lock-off / Lock-on function
Fix OFF position of on/off switch to prevent an accidental switching or fix ON position of on/off switch to ensure comfort during extended work mode.

M10 tool holder thread
Suitable for accessories featuring M10 shank.

M14 tool holder thread
Suitable for accessories featuring M14 shank.

M22 spindle thread
Suitable for accessories featuring M22 mounting bore.

M22 tool holder thread
Suitable for accessories featuring M22 shank.

Choosing the chips ejection direction
Allows to install reflector for chips ejection in two opposite directions.

Plunge depth control system
Allows the user to select the desired milling depth.

Mitre angular adjustment
Provides a precise and angle-accurate sawing of all required cuts.

Ni-Cd battery
Provides good performance at low temperatures.

Overload protection
Automatically switches off the power tool in case of overheating.

Power light indicator
On when the power tool is connected to the mains and ready to be switched on.

Rotating rear handle
Rear handle can be rotated into different positions.

Rotation stabilizer
Maintains set rotation rate irrespective of applying pressure on the surface during polishing.

Tool holder
Allows to install accessories with appropriate shank.

Scale of milling depth
Shows the selected depth of milling.

SDS-Max chuck
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

SDS-Plus square chuck
Suitable for accessories featuring equivalent shank. It allows fast manual fastening.

Sliding working table
Intended to ease the workpiece sliding movement when performing cross and angular cutting.

Spindle lock
Blocks the spindle in its rotating movement so that the grinding accessories may be inserted or removed easily.

Spindle lock
Blocks the spindle in its rotating movement so that the diamond cutting blade may be inserted or removed easily.

Spindle lock
Blocks the spindle in its rotating movement so that the router bits may be inserted or removed easily.

Stroke rate regulation
Allows to adjust optimal stroke rate for specific materials.

Speed adjustment
Allows to change revolutions per minute.

Table for stationary use
Allows the use of power tool in stationary mode.

Temperature protection
Automatically switches off the power tool in case of overheating.

Temperature setting
Allows to adjust optimal temperature for specific types of work.

Variable paint flow
Allows to set the intensity of the paint application ensuring perfect coverage.

Variable speed
Allows to select optimal belt speed for specific types of work.

Velcro and clamping fixing system
Allows the use of abrasives with both type of fixing system: clamping or velcro.

Velcro fixing system
Allows quick, easy and safe fixation of abrasives.

Water resistant on/off switch
Switch is protected against water splashing.

Wet cutting
Allowed thanks to the integrated water cooling system.

Wet grinding
Allowed thanks to the integrated water cooling system.

Wet operation
Allowed thanks to the integrated water cooling system.

Carbon brush replacement indicator light
Warns regarding the need to replace carbon brushes.

Circular saw blade easy change
Enables fast manual changing of circular saw blade without any special key.

2 lines projection mode
Allows to project one horizontal line and / or one vertical line.

3 lines projection mode
Allows to project one horizontal line and / or two vertical lines.

5 lines projection mode
Allows to project one horizontal line and / or four vertical lines.

Laser class 2

Automatic self-levelling

High class OSRAM Diode

Belt clip
The tool is provided with hook for easy carrying.

range

ref-level

stat1

stat2

measure

calcul

celect-c

celect-m

mem

Battery locking system
Locking bracket provides secure attachment battery, and prevents it disconnection even by work with strong vibrations.

Brushless motor
Brushless motor without carbon brush for smooth and efficient work and maintenance-free.

level

lcd

backlight

zoom

4-mode

arc-f

easy-weld

vrd

Input power
Allow use one or three phase input power.

tig/mma

TIG welding technology
Gas tungsten arc welding / Tungsten inert gas welding.

24-4t

Inductance regulation
Allows to adjust the arc softness and stiffness. For deep weld penetration, the arc is made stiffer; however, spattering is increased in this case. The soft arc is used to weld root welds and to lift vertical welds.

Voltage meter
Shows the selected voltage.

Voltage regulation
Allows you to set the voltage value.

External wire feeder
External welding wire feeding unit

CUT technology
Plasma cutting.

Welding current meter
Shows the selected welding current.

Internal wire feeder
Welding machine has Internal welding wire feeding.

Gradual decrease of welding current
Using special regulator time of welding current decrease can be set. Gradual decrease of welding current allows high-quality crater filling in the end of welded seam.

High-frequency arc starting
Welding arc is started without contact between tungsten electrode and welding surface using a flash generated by high-frequency device.

MOSFET technology
Metal-oxide-semiconductor field-effect transistor.

MIG/MMA technology

Air cooling

Hot start function
The hot start function increases the set welding current for a short time at the moment of the welding arc

Current control
Allows the intensity of the current to be changed, depending on the thickness of the metal

3-Phases
Three phase input power.

1-Phase
Single phase input power.

IGBT technology
Insulated-gate bipolar transistor.

MMA welding technology
Shielded metal arc welding / Manual metal arc welding.

SBH05-20 BMC

Technical Specifications
Drilling output in wood 30 mm
Drilling output in steel 13 mm
Drilling output in concrete 20 mm

Features

SBH08-26 BMC

Technical Specifications
Drilling output in wood 30 mm
Drilling output in steel 13 mm
Drilling output in concrete 26 mm

Features

SBH08-26 T BMC

Technical Specifications
Drilling output in wood 40 mm
Drilling output in steel 13 mm
Drilling output in concrete 26 mm

Features